DUSK Planter – Pot with Hidden-Reservoir Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A knurled ball planter that sits on a finned floating tray. Excess water drains into a reservoir hidden inside the tray.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
DUSK is a ball planter covered in a fine diamond knurl, sitting on a finned tray that makes it look like it floats. Water from the top: the excess drops through 19 small holes into a reservoir hidden inside the tray, so nothing reaches your shelf.
Every size is rebuilt, not scaled. The wall (2 mm + 1.8 mm knurl), the seat clearance (0.6–0.8 mm) and the 1 mm tray slots are the same on S, M and L, so all three print and fit the same way.
What's included
Pot – knurled ball, rolled lip, flat bottom (no bridges, no supports), 19 × Ø4 mm drain holes.
Floating Tray – hidden reservoir, a seat that centres the pot, finned rim with 1 mm parallel slots.
Drain Screen – optional printed mesh disc that sits on the pot floor and keeps soil in.
L Two-Tone – the rolled lip, tray and drain screen in colour 2 (one filament swap near the top of the pot).
Size | Pot (Ø × H) | Tray (Ø × H) | Reservoir | Soil | Plates |
|---|---|---|---|---|---|
S · 70 mm | 99 × 70 mm | 85 × 15.5 mm | ≈32 mL | ≈0.37 L | 1 |
M · 90 mm | 127 × 90 mm | 110 × 20 mm | ≈81 mL | ≈0.82 L | 1 |
L · 110 mm | 154 × 110 mm | 134 × 24.4 mm | ≈162 mL | ≈1.5 L | 2 |
L · 110 mm Two-Tone | 154 × 110 mm | 134 × 24.4 mm | ≈162 mL | ≈1.5 L | 2 |
All parts fit any 256 mm-class printer (Bambu Lab X1/P1/A1/H2D/X2D, Prusa MK4/Core One and similar). The reservoir holds about 10 % of the soil volume: water in small amounts and empty the tray if it fills up.
Print profile and tips
All projects are set up for a Bambu Lab X2D (0.4 mm nozzle) and slice the same on other 256 mm printers.
Setting | Pot | Floating Tray | Drain Screen |
|---|---|---|---|
Layer height | 0.20 mm | 0.20 mm | 0.20 mm |
Walls | 3 | 4 | 3 |
Top / bottom layers | 6 / 4 | 7 / 4 | 6 / 4 |
Infill | 15 % gyroid | 15 % gyroid | 15 % gyroid |
Supports | None | None | None |
Brim | Auto | Auto | Auto |
Orientation | As loaded, flat | As loaded, flat | As loaded, flat |
Material: PLA or PLA Matte indoors; PETG for balconies and outdoors.
Watertight tray: keep the 4 walls and 7 top layers. For a bone-dry shelf, add a thin coat of clear varnish inside the reservoir.
Two-Tone L: the lip is a separate part assigned to filament 2, so the printer swaps colour once near the top. No AMS? Use a pause at that layer and swap by hand.
Fit: the pot drops into the tray seat with 0.6–0.8 mm clearance on every size. No sanding needed.
Seam: set to aligned; the knurl hides it well.
DUSK is free. If it found a home on your shelf, a Like helps me keep designing – and I'd love to see your Make with a plant in it. Tell me which plant you picked!
NEW - Bambu Lab H3C: DUSK_Planter_L_110mm_TwoTone_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.