1 / 3
Customizable NACA 4412 Wing Rib: Hollow D-Cell RC Rib with Spar Slot (Parametric Presets) — zdjęcie 1
1 / 3

Customizable NACA 4412 Wing Rib: Hollow D-Cell RC Rib with Spar Slot (Parametric Presets)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hollow NACA 4412 RC rib: D-cell, 8 mm spar slot, 100/120/150 mm presets - TrueGeometry Playground recipe.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

A lightweight, fully 3D-printable RC wing rib: a hollow NACA 4412 aerofoil wall, a closed leading-edge D-cell, two spar webs forming an 8 mm rectangular spar slot, and a hollow aft bay. Built and exported entirely in TrueGeometry Playground with native commands - no booleans, no unions. Exported mesh verified watertight (440 triangles, every edge shared by exactly two faces).

Customize it: the recipe is variable-first with ready 100 / 120 / 150 mm chord presets, plus wall, rib thickness, web and slot variables. Full Playground commands: see the blog article and the attached rib4412_recipe.txt. How to run scripts step by step: attached guide PDF.

Blog article with full recipe and technique: https://blog.truegeometry.com/0_0_0_0/blogs/post-b186e704.html

Try it in the Playground: https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html

Printing: lay flat, no supports, PLA/PETG/LW-PLA, 0.4 mm nozzle. Honest status: geometry verified, not yet test-printed - print one rib, check the spar fit, and please post a Make to help the community.

License: CC BY-NC 4.0 - free for students, teachers and hobbyists with attribution; commercial use requires TrueGeometry's consent.