Customizable NACA 4412 Wing Rib: Hollow D-Cell RC Rib with Spar Slot (Parametric Presets)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hollow NACA 4412 RC rib: D-cell, 8 mm spar slot, 100/120/150 mm presets - TrueGeometry Playground recipe.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
A lightweight, fully 3D-printable RC wing rib: a hollow NACA 4412 aerofoil wall, a closed leading-edge D-cell, two spar webs forming an 8 mm rectangular spar slot, and a hollow aft bay. Built and exported entirely in TrueGeometry Playground with native commands - no booleans, no unions. Exported mesh verified watertight (440 triangles, every edge shared by exactly two faces).
Customize it: the recipe is variable-first with ready 100 / 120 / 150 mm chord presets, plus wall, rib thickness, web and slot variables. Full Playground commands: see the blog article and the attached rib4412_recipe.txt. How to run scripts step by step: attached guide PDF.
Blog article with full recipe and technique: https://blog.truegeometry.com/0_0_0_0/blogs/post-b186e704.html
Try it in the Playground: https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html
Printing: lay flat, no supports, PLA/PETG/LW-PLA, 0.4 mm nozzle. Honest status: geometry verified, not yet test-printed - print one rib, check the spar fit, and please post a Make to help the community.
License: CC BY-NC 4.0 - free for students, teachers and hobbyists with attribution; commercial use requires TrueGeometry's consent.