1 / 4
2020 Aluminum Profile Monitor Arm Mount for 20x30mm Arm — zdjęcie 1
1 / 4

2020 Aluminum Profile Monitor Arm Mount for 20x30mm Arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy monitor arm mount that fits a 20mm x 30mm rectangular tube arm

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print in mechanically strong material only, PLA IS NOT RECOMMENDED

The part features M3 holes for M3x40 bolts that act as reinforcement perpendicular to the layer lines.

I printed PETG with:

  • 6 Perimeters

  • 35% Gyroid Infill

  • 6 Top/Bottom Layers

  • 0.15mm STRUCTURAL

BOM:

  • 6x M4x16mm socket head

  • 6x M4 groove nuts

  • 5x M3x40mm socket head

  • 2x M5x10mm (for fixing the arm, friction is usually enough)

I don' take responsibility for fallen monitors but if you print it in the right material and with the right settings it should be fine.

Tagi