1 / 4
2020 Aluminum Profile Monitor Arm Mount for 20x30mm Arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy monitor arm mount that fits a 20mm x 30mm rectangular tube arm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in mechanically strong material only, PLA IS NOT RECOMMENDED
The part features M3 holes for M3x40 bolts that act as reinforcement perpendicular to the layer lines.
I printed PETG with:
6 Perimeters
35% Gyroid Infill
6 Top/Bottom Layers
0.15mm STRUCTURAL
BOM:
6x M4x16mm socket head
6x M4 groove nuts
5x M3x40mm socket head
2x M5x10mm (for fixing the arm, friction is usually enough)
I don' take responsibility for fallen monitors but if you print it in the right material and with the right settings it should be fine.