1 / 2
Indoor Boomerang - Three Wing Returning Boomerang with Real Aerofoil, Right or Left Handed (OpenSCAD) — zdjęcie 1
1 / 2

Indoor Boomerang - Three Wing Returning Boomerang with Real Aerofoil, Right or Left Handed (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A light three-wing boomerang that comes back in a living room or garden, with a proper aerofoil on every wing.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A light three-wing boomerang that really comes back, small enough for a big room or the garden. Each wing has a proper aerofoil: a rounded leading edge and a long taper to the trailing edge. Right-handed by default; tick left-handed in the Customizer.

HOW TO THROW

Hold a wing upright with the flat side away from you, tilt it slightly outwards, and flick it forward hard with plenty of spin. It loops round and comes back. Throw away from people, pets and windows.

DETAILS

• About 170 mm across, 3.2 mm thick, roughly 17 g.

• Prints with no supports: the bottom is flat and the aerofoil slopes down on top.

• Bambu Studio: 43 min, 16 g.

CUSTOMIZE (OpenSCAD)

Span, wing width, thickness and left- or right-handed.

Tagi