1 / 2
Rain Gauge - Garden Rainfall Gauge with 0-100 mm Scale and Lawn Spike, One Piece (OpenSCAD) — zdjęcie 1
1 / 2

Rain Gauge - Garden Rainfall Gauge with 0-100 mm Scale and Lawn Spike, One Piece (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Measure your rainfall in millimetres: a straight-sided gauge with a 0-100 mm scale and a spike for the lawn.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Measure rainfall in your garden. The straight-sided tube reads rainfall directly in millimetres on the engraved 0-100 mm scale, and the spike pushes into the lawn.

HOW TO USE

Before first use, pour in water up to the 0 line (that fills the pointed bottom). After rain, read the level, then tip it out back down to 0.

DETAILS

• 36 mm inside diameter, 211 mm tall including the spike; ticks every 5 mm, numbers every 10.

• Prints upside down in one piece with no supports: the open top sits on the bed, the pointed bottom is a 45-degree cone inside and out, and the spike tapers to the top of the print.

• Bambu Studio: 1 h 54, 35 g. PETG or ASA last longer outdoors.

CUSTOMIZE (OpenSCAD)

Inside diameter, scale length and spike length.

Tagi