1 / 2
Bottle Watering Rose - Turn a Drinks Bottle into a Watering Can for Seedlings, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Bottle Watering Rose - Turn a Drinks Bottle into a Watering Can for Seedlings, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A gentle sprinkler head that grips your bottle's own cap: 37 fine holes for watering seedlings and houseplants.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Turn any drinks bottle into a gentle watering can for seedlings, cuttings and houseplants. Make one big hole (about 8 mm) in the bottle's own cap, screw it back on, push the cap into the rose's ribbed cup, then tip and squeeze: water sprinkles out of 37 fine holes instead of gushing and washing seeds away.

WHY NO THREAD?

It uses the bottle's own cap, so there's no thread to get wrong: twelve flexible ribs grip any cap close to the size you set (30 mm suits standard 28 mm soda bottles; measure yours).

DETAILS

• 64 mm rose face with 1.2 mm holes.

• Prints with no supports: the face is on the bed, the rose flares out at 45 degrees (so inside it's a 45-degree funnel), and the cup is open at the top.

• Bambu Studio: 50 min, 19 g.

CUSTOMIZE (OpenSCAD)

Cap diameter, rose size, spray hole size and rib grip.

Tagi