Liczymy pasujące modele…
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
I made these in about 5 minutes to hold these components in this enclosure. link to rest of project: https://www.reddit.com/r/Esphome/comments/12t5z8u/comment/jh3l9i4/
Gardena Micro-Drip Sprinkler heads This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose. Models There are 3 models, for 3 diffferent angles: Angle File 160° Gardena Micro-Drip Sprinkler 3.stl 100°…
My Rainbird sprinkler valve box lids needed to be raised up about 3.5 inches. So I designed this. Enjoy.
Adapt from 3/4" FPT down to 3/8" MPT. This is just a standard pipe bushing. I used this for blowing out sprinklers this fall. Careful if you thread this into PVC tightly you are probably not getting it out unless you used teflon tape. I…
When you need to remove or raise your rainbird sprinkler, remove the top cap and use this tool with either a 52mm socket, or a 1/2" drive and a socket wrench to spin out the body, service it or add a riser then put it back in. It saves a…
This model is an MX‑G System Sprinkler Extension designed for easy integration into modular setups. It includes an M5 internal thread compatible with Festo QSM‑M5 pneumatic couplings or any similar push‑in connector. The design provides…
print as oriented. If both models are on the plates, pause at layer 13. The pieces can fit 10mm x 5mm x 2mm magnets and will be 0.3mm off the build plate or 13 layers. i personly plan to spread wild flower seeds around my town where they…
Files provided include .stl, .step, as well as a fully parameterized Autodesk Fusion model for any necessary updates to size to fit different components. Stock model will fit a Raspberry Pi Zero W/2W, along with the 5V power supply and…
Protective cover for garden irrigation misters that prevents nozzle connectors from getting broken when someone steps on them. Designed for the cheap-o connectors, but included is a fully parametric Fusion 360 file to customize for your…
I designed this extension because the other ones I found couldn't fit the filter for my Rain Bird and Hunter MP rotator nozzles and I also found that the nozzles were quite hard to screw in so I designed my own. There's chamfers on both…
Sprinkler Protector Heavy duty protection from foot traffic, weed trimmers and mowers. Extra thick top designed to take abuse, long anchors resist being sucked from the ground from mowing. 58mm standard hole, plus I added the blank for…
Using TheFilament ASA (PETG is a good alternative) Print settings: nozzle: 0.4 mm layer height: 0.2 mm perimeters: 4 infill: 15% supports: yes STEP file included
Turn the tap on and set desired stream intensity using your hose attachment. Turn the water supply off using the tap. Place your hose in the stand Turn the tap on. Watch your grass thank you.
I designed a taller and wider front wheel, along with a taller rear wheel with more teeth, for the self-driving sprinkler tractor. These changes were made for two main reasons. First, the original design could sometimes get stuck in the…
Garden sprinkler PETG print material Supports needed Finnaly needs glued by epoxy Thread G 3/4" standard Should be mounted on holder
I picked up some micro-sprinklers for our irrigation system and didn't realize they had threaded 10-32 connectors instead of a barb connection. Made this little adapter so I can just slip the 1/4" line right onto it instead of buying…
Spare part for Perrot sprinkler, model Triton-L 11928998 Without screw-on hook
This catch cup is a calibration tool for sprinkler and irrigation systems. Stake it into your turf, run your sprinkler for a set time, then read the collected water level off the embossed markings on the cup wall. It measures from 0.5 to…
V1 is a traditional thread pattern. V2 is a Spiral thread pattern that works better on our particular watering can. Please share your Make:)
Sprinkler disc retainer Tested on: Gardena 18330-34 Works most likely on: Gardena 18330-20 Gardena 18330-31 Gardena 18330-32 Gardena 18330-33 etc Mine is assembled without an O-ring, but if you need one, I've added a file that can work if…
NOTE: Requires a #9 O-Ring (often found at hardware stores as a “faucet o-ring”) to function properly. I lost the little cleanout cap / plug that goes on the end of my Melnor oscillating sprinkler. When I contacted their customer support…
Adapter plate for mounting an OSPi (with attached Raspberry Pi) to a Winford Engineering DINP07-PI01 DIN rail adapter. The plate uses the standard RPi hole spacing so this should work for other mounts as well. The plate attaches to the…
this a cover for the home water sprinkler remote control the original is made by rubber with the time broke on part i made this for good replacement and strong for long time
Took inspiration from another model. Redesigned my own version. No supports required Integrated peg Will need a zip tie or hose clamp to use under higher pressures Its still a work in progress.
just for two shower gel bottles and a shaver Print instructions Category: Bathroom
Print these two parts in either PETG or better yet ASA. In addition to the two printed parts you will need (1) one 54mm OD x2mm thick O-ring, (2) four 10-24 x .625 FH screws and (3) three 3 x 100mm steel or aluminum dowel pins. The thread…
I coated it with super glue since i don't have any other materials other than PLA. Printed at 100%
I had a spot in m yard that I wanted to have irrigated that was next to my house, but I did not want the water to spray the house. This deflector forces the spray to go in the direction you want as long as the sprinkler head emits water…
A spare part for all those who constantly hit the speed sprinkler with the lawn mower and then cut off the locking mechanism :D Category: Replacement Parts
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
a simple sprinkler elbow thingy to completely change the flow of water of your hydroponic system. the original way the pump work is just making the water circulate underwater from the side… very inneficent and wasteful. this adapter fits…
Print in PETG. Made to be attached to the profile of a greenhouse. But can also be screwed to a wall. Nuts and bolts may need to be printed at 95% size.
More information: https://pihrt.com/clanky/mereni-vysky-tl136?showall=1 and here: https://github.com/martinpihrt/OSPy
I created these from scratch and tested several versions of them to get a great result and a great spray all around. Files included are 180 degrees, 90 degrees, and 45 degrees
For this Coffee Sprinkler it is essential that your printer bed is perfectly leveled, also the z-offset should be perfectly adjusted to get the best printing quality on your printer. The file has been tested on a Creality Ender 3 v3 SE…
This is a clip to hold the sprinkler rotor shaft when making adjustments.
Bosch / Simens dishwasher ceiling sprinkler. Print from ASA/ABS. PETG is too weak/plastic under the influence of temperature
I installed two Orbit Gray Outdoor Timer Cabinet (Converts Indoor Sprinkler Controller for Outdoor Use) from Lowes, for unintended purposes. One houses an Alexa Echo Dot so we can have music out on the back patio. The other one houses…
This enclosure was designed as an Opensprinkler control box running on a Raspberry Pi4 with a 16 channel relay board and 7 inch touchscreen but can also be used as a general purpose Pi4 enclosure. The enclosure lid is hinged and has snap…
Those sprinklers are great distributing water, but really weak. Of 5 o them 3 were broken by my 7 (yes 7kg) lap dog. Here the solution. use the original o-ring in the quick connect, or just push fit a bit of hose over it. Recommended ABS…
Zahradní rozstřikovač kruhový, materiál PETG, vyzkoušeno na pitnou vodu, tlak 3 bary. S připojením na zahradní hadici Tlakově by měl snést do 6 bar.
Ich habe die Kopfe und teilweise die Anschlüsse angepasst. Da bei der original Versionen nicht verfügbar sind. Die Köpfe habe ich alle neu entworfen und mit Gummi ringen geplant. Damit die Düse auch richtig funktioniert.
Soon after starting on installing 75 sprinkler heads around my property, I realized that it can be difficult to keep dirt out of open ends of poly piping. This is a quick and ugly plug to keep the pipe as dirt free as possible while…
printed at 0.2 layer 4 perimeters with petg for a bit of strength, now in 2 parts to make printing easier, using my p1p it fits perfectly the ¾ bsp tap fitting , used variable layer height for the top of the threads so no supports need…
This is a 3D Sprinkler designed to water your potted plants. Just place the sprinkler around it without having to uproot your plant, as it is cut at an angle of 30 degrees. Video link: https://youtu.be/y1kl_0LNISU Walls of sprinkler are 2…
Place it holes up for a sprinkler or holes down to use as a soaker. needs an O ring to fit hose adapters print with support on build plate
A simple lightweight sprinkler with a ground spike to keep it in place. You will need an O ring for the hose adapter. there are 2 versions, the aligned model has holes in a row the random model has staggered holes to cover a larger area.…
Mandalorian helmet water sprinkler. Standing at 81mm, suits 20 mm (¾”) BSP water hose connections. Updated from previous version to larger fewer holes. .stl & .3mf files available. Print suggestion: print at layer height of 0.16mm tree…
This is my very first attempt at building a water sprinkler, so if you have any suggestions for improvements, I would be grateful. It has 3 x 12 holes (minus one) at angle 30, 45 and 60 An anchor can be attached to the bottom of the…
3d benchy sprinkler for garden hose: PLA supports (touching buildplane) 90g (aprox.) 4h (aprox.) hose seal: TPU NO supports 1g 3min. I hope you like it, please comment if you haven't understood. thank you.
I don't print it. my printer's part is breake. i can't print, sorry.
I lost or broke the thing that goes on the spout of my watering can, so I made my own. I've included a version without holes in case someone wants to drill their own or modify the design. I tried printing without the top and bottom layers…
jet d'eau en forme de champignon 1 joint torique pour raccord automatique nécessaire impression avec support remplissage25% minimum
3D Printed Vortex Sprinkler – No Moving Parts, Ready to Use This innovative sprinkler is designed for hassle-free use straight off the 3D printer. No assembly or post-processing required. With a smart, print-in-place design and zero…
Make watering the lawn great again with #thesprinkler. made to fit the Orbit tripod sprinkler, like below. 3 layer walls, 20% infill https://a.co/d/gvEYu2w https://www.tiktok.com/t/ZTj9nu2nL/…
Please print these in ABS or other filament that does not deteriorate when left outside. Print with supports (I use tree slim supports). To put these together you need some screws and washers. I just found some random screws and washers…
This is a remix to add width to the wheels to "stance my tractor" but more importantly keep it from tipping over on rough ground.
bien orienté les pièce pour une impréssion facile moulin et base à imprimer avec support
Updated with V2, I reduced the amount of holes and increased the diameter so that it would pour better. Printed without supports with PLA and 0.2mm layer height. It doesn't work amazingly but I will work on updating the design to optimise…
After spending a considerable amount of money on these pop-up sprinklers and needing only the internals, I decided I had had enough. I modeled the internal piece where the spray nozzle connects to your irrigation line. Please note that to…
For this competition, I thought that a rotating garden sprinkler system would be the right thing to do, and it would also be a real challenge. I'm glad I managed to post a functioning sprinkler on the last day. The individual parts…
Summer has come, it’s time to take out the watering can and water the garden. A head for a watering can with a hole diameter of 30 mm and small hole size of 2 mm. The sources are in the Source.zip archive, you can modify the nozzle as you…
Úprava: 10. června 2025 Přidáno: Válec 9.22 90 pro zavlažování 90° Válec 9.22 2x90pro zavlažování 2x90° Zbytek originálního modelu najdete na: https://www.thingiverse.com/thing:2854151
I love these 8mm pneumatic irrigation systems but If you go on Amazon etc you can only find small micro drop things or spray nozzles which only produce a fine dust which is easily blown away by any wind. So I made this one. It. prints in…
Designed to make an easily replaceable sprinker head for a ½" NPT riser or PVC fitting. It doesn't atomize, so there's minimal loss to evaporation, but this also makes it short range and more suited to gardens than lawns. If there's a…
The whole project is based on and of course compatible to the “sprinkler rocket” by Sevro from Makerworld: https://makerworld.com/en/models/1370364-sprinkler-rocket The rocket shown in the picture is the slim-rocket from there. I wanted…
This is an alternative to using tuna cans for a gauge to determine how deep you're zones are watering.
Based on an old design that I could not find for sale anywhere. Spray distance/angle is adjustable by how much the nut is screwed onto the hose end . Includes a ring hook to hang it on a pole or on a stick. Compatible with both ½" and ¾"…
Make Watering Super Fun! Transform an ordinary water bottle into an adorable gardening tool with just one simple step using SUNLU's high-quality PLA filament! Choose between two delightful designs: Paw Version: Soft and cute paw-shaped…
I broke a sprinkler valve cover last year with my mower and ended up having rats sneak in and bite the cables this winter and needing that repaired this Spring. I ordered a 6 inch valve cover from Amazon but the cap ended up not fitting…
I made these in about 5 minutes to hold these components in this enclosure. link to rest of project: https://www.reddit.com/r/Esphome/comments/12t5z8u/comment/jh3l9i4/
Mostly taken from jimerb's original file: https://www.printables.com/model/256225-grass-protection-ring-for-rotary-sprinkler-head Grass Protection Ring for Rotary Sprinkler Head - Remixed with partial parametric dimensions Prevents Grass…
Can be printet in any material with min 15% infill, 5 outline, without support. Enjoy now the easy ajustment: 1) Turn the irritation area angel with the tool in a expected postion left = min, right = max 2) Take care that the arrow on top…
When using a powerful pump and large areas of irrigation, a powerful tool is required. The spray angle is adjustable. When assembling the case, use super glue. P.s. V2.0. For ease of printing, a disassemblable model has been created. For…
13. Juli 2025: V3 Update. Der Kopf ist nicht mehr fest im Druck sondern kann eingeschraubt werden. Vorteile: einmal kann der Auslass und somit der Winkel und die Weite eingestellt werden nach dem Druck. Zweitern kann der Rasensprenger…
Gardena Micro-Drip Sprinkler heads This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose. Models There are 3 models, for 3 diffferent angles: Angle File 160° Gardena Micro-Drip Sprinkler 3.stl 100°…
My Rainbird sprinkler valve box lids needed to be raised up about 3.5 inches. So I designed this. Enjoy.
An easy-to-print WATERING CAN EXTENDER & SPRINKLER | diameter Ø ~27mm & 10 liter Those watering roses/spray attachments were always too big for my needs, so I created this extender for more precise watering! note: (Transparent) PETG ftw &…
Was added the quick connector for garden hose. Second file contains the update of sprinkler for lower pressure. If you choose lower-pressure, please improve infill, standard 15% is bad, it will have the holes in the different places. The…
Simple sprinkler shield. I printed out of ASA using a 0.8 nozzle. This is designed to use Landscaping Spikes or Gutter Nails to hold it in place. You could even use tent pegs or most anything, I suppose. The V2 version is the one with the…
Launchpad is reinforced and adjusted to fit the laminar flow nozzle thru. Adjusted launchpad that fits the laminar flow MK2 nozzle, also added a simple locking wedge so we need no screws. I used 20mm electrician pipes for launchpad feet,…
Tired of struggling with stuck Rain Bird sprinkler heads? This custom-designed, 3D printed Rain Bird Removal Tool makes it quick and easy to extract pop-up sprinkler heads for maintenance, cleaning, or replacement. 🔧 Features: Compatible…
While changing the nozzles in my rainbird 3500 sprinkler head, I thought there must be a better way to hold it up with 1 hand and changing the nozzle with the other. A quick search on amazon for this tool, I saw something similar to this,…
