Hunter / Rainbird Pop Up Sprinkler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pop Up Sprinkler
- Ocena
- 2 / 5
- Polubienia
- 21
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 2059
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
After spending a considerable amount of money on these pop-up sprinklers and needing only the internals, I decided I had had enough.
I modeled the internal piece where the spray nozzle connects to your irrigation line. Please note that to ensure a 100% match, reuse the spring and other parts from your sprinkler.
Print with PETG, Nylon, or CF to handle the water pressure.
This was modeled after the Hunter Pop Up Sprinkler - 6 Inch Pro Spray. Threads match for all spray nozzle types.
V2 now has a thicker neck to ensure it's a bit stronger. If leaking from the threads, apply some Teflon tape for added strength.
Can't find a leak in your system? Check out the new Sprinkler cap added!
Threads:
