Watering can sprinkler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle for a 15mm watering can tube, easy to print. Scalable to fit your watering can.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 708
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Nozzle for a 15mm watering can tube, easy to print. Scalable to fit your watering can.
Depending on your printers precision the sprinkle holes may need some afterwork with a small drill bit.
Print Settings:
Supports: Likely not, depends on your printer and part orientation.
Resolution: 0,2mm
Infill: 100%
Notes: Position the model with the holes facing the print bed to get a large surface area contact and making sure there will be no support cleanup inside of the print.
PLA works as a material of choice as long you make sure to have at least 4 wall perimeters so it doesn't leak. PETG would also be a good choice.
One of my older design from Thingiverse.