1 / 3
Upright holder for sprinkler & tube Gardena micro drip watering system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a spray nozzle 15cm above ground
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 1382
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (56)Powiązane
I remixed a microdrip holder to hold the small micro drip tube (4,6 mm (3/16")) with a spray nozzle vertically.
The nozzle will be roughly 15cm above ground (depending how deep you push it into the soil).
This way I can use a spray nozzle to irrigate an entire area of 40x40cm without the need for the big tubing (13 mm (1/2")) and buying the expensive ‘Extension Pipe for Spray Nozzles (13326-20)’.
I did not like the decipted Small Area Spray Nozzle (13306-20), it didn't spray evenly at any setting. I replaced it with a no name spray nozzle.