Modular handheld sprinkler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to print handheld sprinkler that can be fitted with different caps.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 204
- Wydruki
- 3
- Wyświetlenia
- 1560
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
necessities
1x o-ring (11mm diameter and 2,5mm thickness)
o-ring can be taken from an old hose coupler.
Assembly
After you have printed the nozzle file, insert the o-ring on the nozzle like in the photo's.
the caps can be easily screwed onto the sprinkler.
Print settings
To ensure that the print is watertight, I recommend having at least 4 perimeters and printing with a layer height of no more than 0.2 mm. I have only made the inside with a 4 perimeter in the pre-sliced file to save some time and fillament.
If you still have leaks I recommend reading this article: https://blog.prusaprinters.org/watertight-3d-printing-pt1-vases-cups-and-other-open-models_48949/
I have also left a blank cap so that you can make one yourself.