1 / 6
Gardena Sprinkler Mount 3in1                 Gardena Sprinkler Halterung 3in1 — zdjęcie 1
1 / 6

Gardena Sprinkler Mount 3in1 Gardena Sprinkler Halterung 3in1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gardena Sprinkler Mount 3in1 for Classic Polo, Comfort Aquazoom, AquaZoom M

Ocena
5 / 5
Polubienia
15
Pobrania
66
Wydruki
2
Wyświetlenia
1793
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

English

Gardena Sprinkler Mount 3in1

This mount is designed for the following Gardena Sprinklers:

  • Classic Polo
  • Comfort Aquazoom
  • AquaZoom M

(Other Gardena sprinklers have not been tested yet, but they might fit.)

What you need:

  • Broom handle or shovel handle
  • Screw
  • 3D prints (Sprinkler Mount 3in1, Stick Mount)

(For the broom handle - Print Stick Mount 25mm / For the shovel handle - Print Stick Mount 30mm)

Assembly:

  • Attach the appropriate Stick Mount to the handle and secure it with one or two screws.
  • Place the Gardena Sprinkler on the 3in1 mount, aligning it with the proper grooves, and fasten it with cable ties.
  • Position the handle with the Stick Mount at your desired location.
  • Screw the 3in1 mount onto the handle.
  • Have fun!

 

Deutsch

Gardena Sprinkler Halterung 3in1

diese Halterung ist für die Gardena Sprinkler 

  • Classic Polo
  • Comfort Aquazoom
  • AquaZoom M

(anderen Gardena Sprinkler wurden noch nicht getestet, könnten aber passen)

was man brauch:

  • Besenstiel oder Schaufelstiel
  • Schraube 
  • 3d Drucke ( Sprinkler Halterung 3in1, Stick Mount)

(für den Besenstiel - Stick Mount 25mm drucken / für den Schaufelstiel - Stick Mount 30mm drucken)

Zusammenbau:

  • passenden Stick Mount auf Stiel stecken und mit einer oder zwei Schrauben befestigen
  • Gardena Sprinkler auf Halterung 3in1 in passende Rillen stellen und mit Kabelbindern befestigen
  • Stiel mit Stick Mount an gewünschter Stelle platzieren
  • Halterung 3in1 auf Stiel schrauben 
  • Spaß haben!

 

Tagi