Adjustable irrigation sprinklers for 4.6mm irrigation hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable irrigation sprinklers for 4.6mm (3/16") hose with adapters from 1/2 Garden hose
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 364
- Wydruki
- 2
- Wyświetlenia
- 2413
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Adjustable sprinklers for 4.6mm (3/16") hose. The flow through the sprinkler may be adjusted by twisting the cap. Multiple sprinklers may be places in series using the provided tee.
The sprinklers uses a 2.4 x 18 (OD) mm O-rings to reduce leakage through the threads.
It may be used without if there is sufficient water pressure. My setup is gravity feed and need the o-rings to keep the pressure up.
The sprinklers are connected to the hose by a small angle/tee connector with integrated pegs.
Adapters from ½ “ garden hose to 3/16”/4.6 mm Gardena micro drip hose are included.
Printing:
Material: PETG
Layer height: 0.1 mm
Extrusion multiplier: 1.05 (something slightly higher the you usual use to achieve water tightness)
Supports:
- Sprinkler_Cap, Springkle_bottom: None
- Angle/Tee and adapters: On build plate only
Update:
Per request I've added a directional cap which will only spray water on one side.