Adjustable irrigation sprinklers for 4.6mm irrigation hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable irrigation sprinklers for 4.6mm (3/16") hose with adapters from 1/2 Garden hose
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 364
- Makes
- 2
- Views
- 2,413
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Adjustable sprinklers for 4.6mm (3/16") hose. The flow through the sprinkler may be adjusted by twisting the cap. Multiple sprinklers may be places in series using the provided tee.
The sprinklers uses a 2.4 x 18 (OD) mm O-rings to reduce leakage through the threads.
It may be used without if there is sufficient water pressure. My setup is gravity feed and need the o-rings to keep the pressure up.
The sprinklers are connected to the hose by a small angle/tee connector with integrated pegs.
Adapters from ½ “ garden hose to 3/16”/4.6 mm Gardena micro drip hose are included.
Printing:
Material: PETG
Layer height: 0.1 mm
Extrusion multiplier: 1.05 (something slightly higher the you usual use to achieve water tightness)
Supports:
- Sprinkler_Cap, Springkle_bottom: None
- Angle/Tee and adapters: On build plate only
Update:
Per request I've added a directional cap which will only spray water on one side.