Gardena Micro-Drip Sprinkler head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sprinkler heads for Gardena Micro-Drip system. 3 models for different angles: 40°, 100°, 160°
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 548
- Wydruki
- 2
- Wyświetlenia
- 3316
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gardena Micro-Drip Sprinkler heads
This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose.
Models
There are 3 models, for 3 diffferent angles:
Angle | File |
160° | Gardena Micro-Drip Sprinkler 3.stl |
100° | Gardena Micro-Drip Sprinkler 2.stl |
40° | Gardena Micro-Drip Sprinkler 1.stl |
Print settings
Nozzle: 0.25mm (the 0.4mm isn't precise enough)
Print settings: 0.07mm layers Detail (Prusa Core One)
Perimeters: 3
Top & Bottom pattern: concentric
Material: Prusament ASA (because it is UV resistant, and good for fine details)
Usage:
Be careful and gentle when assembling these sprinkler heads on the tubes, because as a 3d print is more fragile and these prints are small, they can break if you force them.
Give a Like ♥ :
Did you click on Like ♥ ? do it right now, because its free and it helps !