Gardena Micro-Drip Sprinkler head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sprinkler heads for Gardena Micro-Drip system. 3 models for different angles: 40°, 100°, 160°
- Rating
- 5 / 5
- Likes
- 95
- Downloads
- 548
- Makes
- 2
- Views
- 3,316
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gardena Micro-Drip Sprinkler heads
This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose.
Models
There are 3 models, for 3 diffferent angles:
Angle | File |
160° | Gardena Micro-Drip Sprinkler 3.stl |
100° | Gardena Micro-Drip Sprinkler 2.stl |
40° | Gardena Micro-Drip Sprinkler 1.stl |
Print settings
Nozzle: 0.25mm (the 0.4mm isn't precise enough)
Print settings: 0.07mm layers Detail (Prusa Core One)
Perimeters: 3
Top & Bottom pattern: concentric
Material: Prusament ASA (because it is UV resistant, and good for fine details)
Usage:
Be careful and gentle when assembling these sprinkler heads on the tubes, because as a 3d print is more fragile and these prints are small, they can break if you force them.
Give a Like ♥ :
Did you click on Like ♥ ? do it right now, because its free and it helps !