Shimano R-9160 TT/Tri Shifter Replacement Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the button for a Shimano R-9160 shifter to pair with the repair part i made.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Missing the button for your Shimano R-9160 bar end shifter? Stress no more. After making the repair, this seemed like something else i should work on. I also had a request to model it.
This button should work with a unbroken shifter by removing the cover and installing it with the pin. The metal pin is 1mm x 12mm if you loose yours. Be careful not to damage the ears on the shifter as they are fragile.
I tried printing a few different orientations but landed on it just laying flat on the bed. I chose this because it leaves the best surface finish on the button where you touch it. It can easily be printed with it vertical on the end with the hole but you are left with a lip where your finger touches. The flat method does leave supports to be removed but it is all hidden by the cover anyway.
Printed at .12 layers with 4 walls, 100% infill since the part is so small. I would use something with good layer line strength. I don't have an actual need for this at this time but i would print from ABS if i needed an end product.