Shimano R-9160 TT/Tri Shifter Replacement Button
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the button for a Shimano R-9160 shifter to pair with the repair part i made.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Missing the button for your Shimano R-9160 bar end shifter? Stress no more. After making the repair, this seemed like something else i should work on. I also had a request to model it.
This button should work with a unbroken shifter by removing the cover and installing it with the pin. The metal pin is 1mm x 12mm if you loose yours. Be careful not to damage the ears on the shifter as they are fragile.
I tried printing a few different orientations but landed on it just laying flat on the bed. I chose this because it leaves the best surface finish on the button where you touch it. It can easily be printed with it vertical on the end with the hole but you are left with a lip where your finger touches. The flat method does leave supports to be removed but it is all hidden by the cover anyway.
Printed at .12 layers with 4 walls, 100% infill since the part is so small. I would use something with good layer line strength. I don't have an actual need for this at this time but i would print from ABS if i needed an end product.