Motor Pod for $10 Gilder RC Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my custom motor pod that is designed to mount with the low cost foam glider. They are often times found in…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is my custom motor pod that is designed to mount with the low cost foam glider. They are often times found in Walmart.
Using a zip tie, you loop the tie twice through the wing to secure the pod.
Motor Pod 2204 - Standard mini quad motors with a 16-19mm hole mount. I'm using an old 2204 (22mm x 4mm), however you can use any size within that range. 18-26mm
Motor Pod 1106 - As pre request, I created a micro motor pod version. This should work with the EMAX 1106 motor.
Feel free to copy and modify it. Please credit me if you do a remix. https://cad.onshape.com/documents/d35cbd98da0f32cb4f1c6af2/w/089350644a712ee80f9056e9/e/c27bcc94bcf1c9cea9172840
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10-20%
Notes:
Please print this with supports and a high temperature. The higher temperature will increase the bond of the filaments at the cost of some quality. These were printed with PLA, however it can be any type.
Category: R/C Vehicles