Motor Pod for $10 Gilder RC Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my custom motor pod that is designed to mount with the low cost foam glider. They are often times found in…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 62
- Makes
- 0
- Views
- 740
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is my custom motor pod that is designed to mount with the low cost foam glider. They are often times found in Walmart.
Using a zip tie, you loop the tie twice through the wing to secure the pod.
Motor Pod 2204 - Standard mini quad motors with a 16-19mm hole mount. I'm using an old 2204 (22mm x 4mm), however you can use any size within that range. 18-26mm
Motor Pod 1106 - As pre request, I created a micro motor pod version. This should work with the EMAX 1106 motor.
Feel free to copy and modify it. Please credit me if you do a remix. https://cad.onshape.com/documents/d35cbd98da0f32cb4f1c6af2/w/089350644a712ee80f9056e9/e/c27bcc94bcf1c9cea9172840
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10-20%
Notes:
Please print this with supports and a high temperature. The higher temperature will increase the bond of the filaments at the cost of some quality. These were printed with PLA, however it can be any type.
Category: R/C Vehicles