DJI Lightbridge Antenna Mount 16mm tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom mount for the DJI Lightbridge antenna. It was designed to be used with 16mm carbon fiber tubes,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a custom mount for the DJI Lightbridge antenna. It was designed to be used with 16mm carbon fiber tubes, rather than the normal 25mm. It has a strong snap and grip to the tube, with an optional zip tie hole for extra security. Additionally the mount has a zip tie slot to secure the antenna into the base.
This was designed with OnShape, and you may find it there.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
25
Notes:
The most important setting is to simply add support. You can get away with 0 infill
Category: 3D Printing