DJI Lightbridge Antenna Mount 16mm tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a custom mount for the DJI Lightbridge antenna. It was designed to be used with 16mm carbon fiber tubes,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a custom mount for the DJI Lightbridge antenna. It was designed to be used with 16mm carbon fiber tubes, rather than the normal 25mm. It has a strong snap and grip to the tube, with an optional zip tie hole for extra security. Additionally the mount has a zip tie slot to secure the antenna into the base.
This was designed with OnShape, and you may find it there.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
25
Notes:
The most important setting is to simply add support. You can get away with 0 infill
Category: 3D Printing