1 / 2
Fiat / Ford / Lancia (1.1 & 1.2) – Ansaugrohr Reparaturstutzen / Intake Manifold Repair Sleeve — zdjęcie 1
1 / 2

Fiat / Ford / Lancia (1.1 & 1.2) – Ansaugrohr Reparaturstutzen / Intake Manifold Repair Sleeve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bei Fiat-, Ford- und Lancia-Modellen mit 1.1 & 1.2 FIRE Benzinmotor (z. B. Panda 169/312, 500, Punto 188/199, Ford Ka RU

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Beschreibung (Deutsch)

Überblick

Bei den Benzinmotoren des Fiat Panda (Typ 169, z. B. 1.1 / 1.2 FIRE) bricht gerne der kleine Schlauchanschlussstutzen (Unterdruckanschluss / Kurbelgehäuseentlüftung) am Ansaugtrakt bzw. Luftfiltergehäuse ab.

Dieses Reparaturteil spart den teuren Austausch der kompletten Einheit:

  • Passgenaue Reparaturhülse, die einfach über das Loch geschoben wird.

  • Integrierter Schlauchtülle/Nippel, auf den der Schlauch wieder direkt und fest aufgesteckt werden kann.

  • Schnelle Reparatur direkt am Fahrzeug ohne Ausbau des gesamten Ansaugtrakts.

⚠ WICHTIGE SICHERHEITS- & MATERIALHINWEISE

  • Brandhemmendes Filament ist zwingend erforderlich:

    Das Bauteil sitzt direkt im Motorraum und ist Vibrationen, Kraftstoff-/Öldämpfen sowie hohen Temperaturen ausgesetzt. Niemals aus Standard-Materialien wie PLA oder Standard-PETG drucken! PLA verzieht sich bereits ab ca. 50–60 °C, und normale Kunststoffe stellen ein erhebliches Brandrisiko dar.

  • Empfohlenes Material:

    Ausschließlich flammhemmendes / selbstverlöschendes Polycarbonat (z. B. PC-FR / UL94-V0) oder vergleichbar hochtemperaturbeständige, flammgeschützte technische Kunststoffe (z. B. flammgeschütztes PA/Nylon).

  • Montage & Abdichtung:

    Die Bruchstelle vor dem Aufstecken gründlich mit Bremsenreiniger oder Isopropanol reinigen/entfetten. Für eine dauerhaft luft- und vibrationsfeste Abdichtung empfiehlt es sich, die Hülse mit temperatur- und ölbeständiger Dichtmasse (z. B. Dirko HT, Reinzosil) oder benzinfestem 2K-Epoxidharz zu montieren.

  • Haftungsausschluss:

    Nutzung auf eigene Verantwortung. Es handelt sich um ein DIY-Ersatzteil. Nach Montage und den ersten Fahrten regelmäßig auf festen Sitz und Dichtigkeit kontrollieren.

🛠 Druckeinstellungen & Ausrichtung (Wichtig!)

  • Druckausrichtung (Siehe Foto):

    Der Schlauchstutzen MUSS zwingend längs (horizontal liegend) gedruckt werden! Würde der Stutzen stehend gedruckt, verlaufen die Layer quer zur Zug- und Biegerichtung – der Stutzen würde durch das Aufstecken des Schlauchs oder Motorvibrationen entlang der Schichtlinien sofort wieder abbrechen. Liegend verläuft der Schichtverlauf in Längsrichtung, was maximale Bruch- und Biegestabilität garantiert.

  • Stützstrukturen (Supports):

    Supports sind zwingend erforderlich (am besten Organic/Tree-Supports aktivieren), um den liegenden Stutzen und die Rundung der Hülse sauber und formstabil abzustützen.

  • Wände / Perimeters: Mindestens 4–5 Wände (für maximale Dichtigkeit und mechanische Stabilität).

  • Infill: 100 % (oder mindestens 60–80 % mit Gyroid-Muster).

  • Schichthöhe: 0,16 – 0,20 mm.

  • Gehäuse/Enclosure: Für PC-FR dringend empfohlen, um Verzug (Warping) zu verhindern und eine perfekte Schichthaftung zu gewährleisten.

English Description

Overview

A common failure on the Fiat Panda (Mk2 / Type 169, 1.1 / 1.2 FIRE engines) is the small vacuum / crankcase breather hose barb snapping off the intake airbox duct.

This repair sleeve fixes the problem without requiring a full and expensive intake assembly replacement:

  • Precision sleeve that slides directly over the broken stub.

  • Integrated replacement hose barb to securely reattach the line.

  • Quick and clean repair directly inside the engine bay.

⚠ CRITICAL SAFETY & MATERIAL WARNING

  • Fire-Retardant Filament Required:

    This component sits inside the engine bay and is exposed to high ambient heat, engine vibration, and fuel/oil vapors. DO NOT print this in PLA or standard PETG! PLA will soften and fail at moderate engine temperatures, and non-rated plastics pose a fire hazard.

  • Recommended Filament:

    Use strictly Flame-Retardant Polycarbonate (PC-FR, rated UL94 V-0) or flame-retardant Nylon (PA-FR).

  • Installation & Sealing:

    Thoroughly degrease the broken stub with brake cleaner or isopropyl alcohol before installation. To ensure an airtight seal against boost/vacuum leaks and prevent loosening from vibrations, use fuel- and temperature-resistant automotive gasket maker (e.g., Reinzosil, Dirko HT) or high-temp 2K epoxy when sliding the sleeve on.

  • Disclaimer:

    DIY automotive part – use at your own risk. Inspect regularly after initial drives.

🛠 Print Settings & Critical Orientation

  • Print Orientation (See Photo):

    The hose connector MUST be printed horizontally / lying flat! Printing it upright would position the layer lines perpendicular to the bending force, causing the nipple to shear off easily when clamping the hose. Printing horizontally aligns the layer lines along the length of the barb, giving it maximum tensile strength and durability.

  • Supports:

    Supports are strictly required (Tree/Organic supports work best) to properly support the horizontal barb and circular sleeve overhangs.

  • Perimeters/Walls: 4–5 perimeters.

  • Infill: 100% (or min. 60–80% Gyroid).

  • Layer Height: 0.16 – 0.20 mm.

  • Enclosure: Highly recommended for PC-FR to avoid layer delamination and warping.

Tagi