Espresso Coffee Tamper - 58 mm (or Your Basket Size) with Flared Handle, Flat First-Layer Base, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An espresso tamper with a perfectly flat base and a comfortable flared handle. Set the base to your basket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An espresso tamper with a flat base and a comfortable flared handle. Set the base to your portafilter basket (51, 53, 54 and 58 mm are common; 57.5 mm by default for 58 mm baskets). The base prints face down, so the tamping face is the perfectly flat first layer.
DETAILS
• 76 mm tall with a 40 mm knob.
• Prints upright with no supports: the handle flares out at 45 degrees.
• Bambu Studio: 1 h 14, 28 g. Print with high infill for weight, and use a food-safe filament.
CUSTOMIZE (OpenSCAD)
Base diameter and handle height.