Espresso Coffee Tamper - 58 mm (or Your Basket Size) with Flared Handle, Flat First-Layer Base, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An espresso tamper with a perfectly flat base and a comfortable flared handle. Set the base to your basket.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An espresso tamper with a flat base and a comfortable flared handle. Set the base to your portafilter basket (51, 53, 54 and 58 mm are common; 57.5 mm by default for 58 mm baskets). The base prints face down, so the tamping face is the perfectly flat first layer.
DETAILS
• 76 mm tall with a 40 mm knob.
• Prints upright with no supports: the handle flares out at 45 degrees.
• Bambu Studio: 1 h 14, 28 g. Print with high infill for weight, and use a food-safe filament.
CUSTOMIZE (OpenSCAD)
Base diameter and handle height.