Handlebar Accessory Mounts Compatible with Bontrager Comp Stems
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi/Low mounts compatible with Bontrager Comp Stems. Versions for CNCKitchen Heat set inserts and hex nuts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
.3mf files are exported from PrusaSlic3r with settings I use for ABS at 0.2mm layer height. Supports should be set to support from build plate only. Other printers may be able to reduce the supports I include.
There is a thin beam across the two legs of the mounts to prevent them from warping toward each other that need to be removed. A small pair of side snips pops it off easily for me. This model mounts similarly to how the mounts for the Bontrager Pro stems work instead of the split design.
For the version that uses CNCKitchen Heat Set Inserts, it uses M5 x 5.8 (short version) inserts.
Fusion 360 files and .step files are included for ease of modification if needed.
Model was reverse engineered by measuring stem, handlebar, and several trial-and-error prints.