1 / 2
Rugby Kicking Tee - Cup Tee for Place Kicks and Conversions, Tall or Low, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Rugby Kicking Tee - Cup Tee for Place Kicks and Conversions, Tall or Low, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cup kicking tee for rugby place kicks and conversions, with tilt notches and a wide base; set it tall or low.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A cup tee for practising place kicks and conversions: the ball stands on its point in the cup, and two notches in the rim let you tilt it forward or back the way you like. The wide flared base keeps it steady on grass, and the hollow body keeps it light. Set the column height for a tall or a low tee.

DETAILS

• 110 mm base, 80 mm tall as shown (60 to 120 mm in the Customizer).

• Prints upright with no supports: the body leans in at 35 degrees and the hollow inside closes in a 45-degree cone.

• Bambu Studio: 1 h 52, 64 g.

CUSTOMIZE (OpenSCAD)

Base diameter and column height.

Tagi