Saker sharpening stone adaption for knife sharpening tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I want to use a different sharpening stone, I redesigned the mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
To be able to use the larger Saker sharpening stones, I redesigned the holder.
I use a base onto which the sharpening stone is placed and then secured with two clamping plates and four M3x10mm screws. Since the screw connection has to be loosened to flip the grinding stone over (to use a different grit), and this happens very often, I used M3 threaded inserts from CNC Kitchen. On the back, there are three M3 Short threaded inserts (okay, maybe that’s a bit much ;-)) and corresponding screws (M3x6mm) to securely clamp the guide rod in place.