Saker sharpening stone adaption for knife sharpening tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since I want to use a different sharpening stone, I redesigned the mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
To be able to use the larger Saker sharpening stones, I redesigned the holder.
I use a base onto which the sharpening stone is placed and then secured with two clamping plates and four M3x10mm screws. Since the screw connection has to be loosened to flip the grinding stone over (to use a different grit), and this happens very often, I used M3 threaded inserts from CNC Kitchen. On the back, there are three M3 Short threaded inserts (okay, maybe that’s a bit much ;-)) and corresponding screws (M3x6mm) to securely clamp the guide rod in place.