Govee COB LED Strip Light Pro clips and end caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist clips and end caps for Govee COB LED Strip Light Pro (H61E6)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Minimalist screw-mount clips and end caps for the Govee COB LED Strip Light Pro. There are other 3D-printed clips around but they're huge and clunky. I wanted a minimalist design so that they weren't obvious in the light path.
They're designed as an addition to the excellent double-sided tape that comes on the strips - just a little extra help around those tight corners or long overhangs.
I did the end caps as well as I found they're often the first bit to start to curl off the surface of whatever they're mounted to.
PRINTING:
No supports needed.
Up your perimeters so they print virtually solid.
I used PETG for flexibility
6Gx12mm screws work perfectly.
Note that the clips are designed to fit the COB strip with its double-sided tape backing. Without the tape, they'll be loose.
Although the COB's aren't rated as waterproof, I've found that as long as the electronics and electrics are inside, or in a waterproof container, the light strip itself is perfectly fine in sheltered outdoor positions. I have mine around all my garage doors.
Designed for COB model no. H61E6.