Propagation Lid - For Plant Cuttings (Parametric Fusion Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric propagation lid for rooting plant cuttings in water.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Propagation Lid - For Plant Cuttings (Parametric Fusion Design)
A simple parametric lid designed for rooting plant cuttings in water.
The lid fits on tubes, glasses, or similar containers and uses a small piece of foam to hold the cutting upright while roots develop. The foam holder prevents the foam from falling into the container while allowing the cutting to remain stable during rooting.
The foam opening is square, making foam inserts quick and easy to cut compared to circular designs.
This project was originally created for 41 mm shot glasses and 25 mm plastic propagation tubes. Example files for both sizes are included, while the parametric Fusion file can be adjusted to fit other glasses, tubes, and containers.

Why I Made This

I wanted a simple way to root cuttings in water while making water changes quick and easy.
My previous method used larger pieces of foam placed directly on top of the container. Over time, the foam would gradually bend in the middle and develop a shallow cone shape, making it less stable.
By supporting a smaller square foam insert, less foam is required and the insert retains its shape much better. The lid also covers most of the opening, helping to reduce light reaching the water while keeping the cutting securely positioned.
Features
Fully parametric design
Adjustable container diameter
Adjustable foam opening size
Square foam insert for easy cutting
Easy water changes without disturbing the cutting
Helps reduce light reaching the water surface
Foam retaining lip prevents the insert from falling into the container
Foam Holder Design

The original design used a fully enclosed foam holder. During development, I realized that removing well-rooted cuttings could potentially become difficult, as the roots would need to be pulled back through the opening.
To reduce the risk of root damage, the current design includes an opening on one side of the foam holder. This allows the foam insert and cutting to be removed more easily once roots have developed.
If you prefer the original enclosed version, simply suppress the following features in Fusion:
Cut Out The Side
Fillet The Cut
The fillet is only used to smooth the edges of the side opening.

Parameters
The most important parameters are:
Parameter | Description |
|---|---|
a | Outside diameter of the glass or tube the lid is designed to fit |
b | Foam holder wall thickness |
e | Foam opening size |
i | Width of the retaining lip that holds the foam in place |
k | Lid thickness |
n | Height of the outer retaining edge that holds the lid on the container |
o | Foam holder depth |
All remaining dimensions are automatically calculated from these values.

Printing
The model is easy to print and is not particularly sensitive to print settings.
I printed my examples using standard PrusaSlicer settings with automatically generated supports enabled and an overhang threshold of 65°. Very little support material is required, as it is only needed beneath the foam retaining lip.
Recommended orientation:
Place the top surface of the lid directly on the build plate.
Enable automatic supports if desired.
The small amount of support material is easy to remove after printing.
Suggested Settings
Standard slicer profiles work well
PLA or PETG
0.2 mm layer height
2-3 perimeters
Normal infill settings
Foam

Almost any open-cell foam can be used. Filter foam, propagation foam, or even a clean kitchen sponge can be cut to size.
Avoid foams containing soap, detergents, fungicides, antimicrobial additives, or other chemicals that may affect plant growth.
Usage
Cut a small square piece of foam.
Insert the foam into the holder.
Make a small slit in the foam.
Insert the cutting.
Fill the container with water.
Place the lid on the container.
Suitable for many common cuttings, including:
Basil
Thyme
Oregano
Mint
Pothos
Various houseplants and herbs
Included Files
Parametric Fusion file
41 mm shot glass version
25 mm propagation tube version
16 mm Smaller propagation tubes with suction cub holder
The parametric Fusion file is intended as the primary version, allowing the lid to be adapted to different glasses, tubes, and propagation containers.
Customization and Feedback
Feel free to modify, adapt, and remix the design for your own needs.
If you have ideas for improvements, find issues with the design, or have questions about changing the parameters, feel free to leave a comment.
If you're unsure how to adapt the model for a specific container, I may be able to help generate a version that fits your dimensions.
Updated with a 16 mm version.