Case for SZBK07 300W Buck DC-DC Step Down Converter with vents and cable relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
300W Buck Step Down Case with vents and cable relief
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
300W Step Down Buck converter case
This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and tells me the design was worth sharing.
SZBK07 Can be found on Amazon here :
https://link.amazon/B0eILe6fx
or AliExpress :
https://s.click.aliexpress.com/e/_c4PzvoZN
Created for multiple projects as a versatile power adapter such as running 5V led strips on 12V supply and running 12V to Bigtree Tech pad 7 from 24V printer power supply , suitable for higher wattage applications where you wish to reduce voltage and control current.
Features :
Vented slots for cooling
Cable relief clamps for stopping cables pulling out
Protected electronics from shorting
Board fixed to base on diagonal so it does not fall out when you take the cover off
Slot for adjusting voltage and current with case lid on
Printing :
No supports Needed
Suggest 2-3 perimeters , 20% infill , PETG-CF or ASA , PPS , PC any higher temp filament .
Assembly :
300W 20A Buck Step down converter
4x M3 hex nuts , push into the base
2x M3 x 4mm bolts - Fixing the board to the base
2x M3 x 30mm bolts - Fixing the lid to the base
Drop me a Like , post a comment or a make if you appreciate my free work.