Gridfinity Gorilla Mini Glue Gun Stand - Magnets

This is a remix of WalleyeGuy's Gridfinity Stand for Gorilla Mini Hot Glue Gun with magnet holes added to the base. Nothing else is changed.

What's different

• 32 magnet holes in the 4x2 Gridfinity base (4 per cell)

• Holes are 6.5 mm wide and 2.4 mm deep, sized for standard 6 x 2 mm Gridfinity magnets

• The stand itself (gun cradle, glue stick slots, cord hook) is the same as the original

Fit note

This stand is made for the Gorilla Mini hot glue gun. The gun in my photos is the full-size Gorilla Dual Temp hot glue gun, which is bigger and does not fit correctly. The photos show the magnet base and overall build, not the intended fit. If you have the full-size gun, this stand is not the right size.

Printing

• PLA, 0.20 mm layer height, 2 walls, 15% infill

• Prints upright with no supports

• Size: about 169 x 84 x 122 mm

Assembly

• Press 32 magnets (6 x 2 mm) into the holes in the base after printing. Add a drop of CA glue if they feel loose.

• Check polarity against your baseplate before gluing so the stand pulls down instead of pushing away.

Make a matching baseplate

Generate a 4x2 baseplate with matching magnet pockets on Perplexing Labs Gridfinity Rebuilt (Baseplate) using these settings:

• Grid base size: 42 mm

• Grid rows: 2

• Grid columns: 4

• Style: Skeletonized (or Weighted, if you want extra heft)

• Magnet pockets: on

• Magnet radius: 3.25 mm (fits 6 x 2 mm magnets)

Leave everything else at the defaults, then click Render and Download. The finished baseplate is 168 x 84 x 11.9 mm and takes another 32 magnets.

Credits

Gridfinity version by WalleyeGuy, based on inorishizuka's update of Mini Hot Glue Gun Station with Cord Management by RPR Designs. Licensed CC BY-NC-SA 4.0, same as the original.

Remix credits

• Mini Hot Glue Gun Stand & Craft Station with Cord Management by RPR Designs (Printables)

• Gridfinity Stand for Gorilla Mini Hot Glue Gun by WalleyeGuy (MakerWorld), the model this is directly remixed from

Print profile

0.2mm layer, 2 walls, 15% infill

• Bambu Lab X1 Carbon, 0.4 mm nozzle, Textured PEI plate

• PLA, 0.20 mm layer height, 2 walls, 15% grid infill

• Prints upright with no supports (auto brim)

• After printing, press 32 magnets (6 x 2 mm) into the base. Add a drop of CA glue if they feel loose, and check polarity against your baseplate first.

• Sliced for: Bambu Lab X1 Carbon

• Plates: 1

• Print time: about 4 h 16 min

• Filament: PLA #057748 (156 g)

• File: the 3MF labeled "print profile" in Model Files

Also on MakerWorld, with one-click print profiles for Bambu Studio: Gridfinity Gorilla Mini Glue Gun Stand - Magnets