Mirror Clips - Offset Wall Clips for Frameless Mirrors, Glass and Panels, Set of 8, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Offset clips for hanging a frameless mirror, glass splashback or sign on the wall. Set your glass thickness.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Offset clips for hanging a frameless mirror, a glass splashback, a sign or a picture panel on the wall. Screw two along the bottom edge and two along the top; the lip reaches over the edge of the glass and holds it flat against the wall. Set the mirror thickness in the Customizer. Eight clips with countersunk screw holes.
DETAILS
• For 5 mm glass as set (2 to 12 mm in the Customizer), 7 mm lip, 18 mm wide, for 4 mm screws.
• Prints on its side with no supports, which also makes the lip strongest; the screw holes are teardrop-shaped.
• Bambu Studio: 41 min, 14 g for all 8.
CUSTOMIZE (OpenSCAD)
Glass thickness, lip reach and number of clips.