Mirror Clips - Offset Wall Clips for Frameless Mirrors, Glass and Panels, Set of 8, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Offset clips for hanging a frameless mirror, glass splashback or sign on the wall. Set your glass thickness.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Offset clips for hanging a frameless mirror, a glass splashback, a sign or a picture panel on the wall. Screw two along the bottom edge and two along the top; the lip reaches over the edge of the glass and holds it flat against the wall. Set the mirror thickness in the Customizer. Eight clips with countersunk screw holes.
DETAILS
• For 5 mm glass as set (2 to 12 mm in the Customizer), 7 mm lip, 18 mm wide, for 4 mm screws.
• Prints on its side with no supports, which also makes the lip strongest; the screw holes are teardrop-shaped.
• Bambu Studio: 41 min, 14 g for all 8.
CUSTOMIZE (OpenSCAD)
Glass thickness, lip reach and number of clips.