1 / 2
Bolt and Nut Size Gauge - Metric M2 to M12 Holes, Nut Hexes and Length Ruler, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Bolt and Nut Size Gauge - Metric M2 to M12 Holes, Nut Hexes and Length Ruler, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Identify loose metric screws, bolts and nuts: M2 to M12 holes, M3 to M10 nut hexes and an 80 mm length ruler.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Identify loose metric screws, bolts and nuts in seconds: push a bolt through the smallest hole it fits (M2 to M12), drop a nut over the hexagon that matches (M3 to M10), and measure the screw length on the 80 mm ruler, which has a stop at zero. Every size is labelled. Handy for the screw tin, the workshop and flat-pack furniture.

DETAILS

• 170 x 100 x 4 mm plate with 5 mm hexes.

• Prints flat with no supports. The holes are clearance size and the hexes are 0.3 mm under, so the right size slips through and over; check one you know.

• Bambu Studio: 1 h 23, 46 g.

CUSTOMIZE (OpenSCAD)

The hole sizes and the nut sizes (with their width across flats).

Tagi