1 / 2
Salt and Pepper Shakers - Fluted Pair with S and P and Fill Plugs, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Salt and Pepper Shakers - Fluted Pair with S and P and Fill Plugs, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A matching fluted pair with S and P on the sides, different hole patterns and press-in fill plugs.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A matching pair of salt and pepper shakers with S and P on the sides and different hole patterns (three holes for salt, seven for pepper), and a press-in plug in the base for filling. Fluted sides give a good grip and look smart on the table.

DETAILS

• 46 mm wide, 80 mm tall.

• Prints with no supports: each shaker prints upside down with the holes in the first layers on the bed, and the plugs print flat. Use a food-safe filament.

• Bambu Studio: 2 h 18, 76 g for both.

CUSTOMIZE (OpenSCAD)

Diameter, height and hole size.

Tagi