1 / 2
Hanging Planter Ring - Hang a Plant Pot with 3 Cords and a Hub, No Macrame, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Hanging Planter Ring - Hang a Plant Pot with 3 Cords and a Hub, No Macrame, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hang a plant pot without macrame: the pot sits in the ring, three cords run up to the hub, the hub hangs on a hook.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hang a plant pot from the ceiling, a bracket or a porch hook without macrame: the pot drops into the ring and sits on its rim, three cords run up from the eyelets to the hub, and the hub hangs from a hook. Set the ring to the pot's diameter just under the rim in the Customizer. For trailing plants, herbs and strawberries.

DETAILS

• For pots about 120 mm across under the rim as set, 159 mm overall, 6 mm cord holes.

• Prints flat with no supports. PETG or ASA last best outdoors.

• Bambu Studio: 45 min, 22 g for the ring and hub.

CUSTOMIZE (OpenSCAD)

Pot diameter, ring width and thickness.

Tagi