Hanging Planter Ring - Hang a Plant Pot with 3 Cords and a Hub, No Macrame, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang a plant pot without macrame: the pot sits in the ring, three cords run up to the hub, the hub hangs on a hook.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hang a plant pot from the ceiling, a bracket or a porch hook without macrame: the pot drops into the ring and sits on its rim, three cords run up from the eyelets to the hub, and the hub hangs from a hook. Set the ring to the pot's diameter just under the rim in the Customizer. For trailing plants, herbs and strawberries.
DETAILS
• For pots about 120 mm across under the rim as set, 159 mm overall, 6 mm cord holes.
• Prints flat with no supports. PETG or ASA last best outdoors.
• Bambu Studio: 45 min, 22 g for the ring and hub.
CUSTOMIZE (OpenSCAD)
Pot diameter, ring width and thickness.