1 / 2
Rising Snowman Fidget - Print-in-Place Telescoping Snowman, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Rising Snowman Fidget - Print-in-Place Telescoping Snowman, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lift him by the head and he rises to twice his height; set him down and he sinks back into a snowball.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A print-in-place telescoping snowman: lift him by the head and he rises out of himself to more than twice his height, coal buttons and all; set him down and he sinks back into a snowball. Lips on every section catch, so he never comes apart. A winter cousin of the Rising Ghost Fidget, and a lovely stocking filler.

DETAILS

• 60 mm wide, 55 mm tall collapsed and about 120 mm risen, in four sections.

• Prints collapsed in one piece with no supports: the catch lips have 45-degree faces, the head is pointed and every hole has a pointed top. If the sections fuse, raise the clearance to 0.5 mm in the Customizer.

• Bambu Studio: 58 min, 27 g.

CUSTOMIZE (OpenSCAD)

Number of sections, width, section height and clearance.

Tagi