1 / 2
Rising Snowman Fidget - Print-in-Place Telescoping Snowman, No Supports (OpenSCAD) — image 1
1 / 2

Rising Snowman Fidget - Print-in-Place Telescoping Snowman, No Supports (OpenSCAD)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lift him by the head and he rises to twice his height; set him down and he sinks back into a snowball.

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A print-in-place telescoping snowman: lift him by the head and he rises out of himself to more than twice his height, coal buttons and all; set him down and he sinks back into a snowball. Lips on every section catch, so he never comes apart. A winter cousin of the Rising Ghost Fidget, and a lovely stocking filler.

DETAILS

• 60 mm wide, 55 mm tall collapsed and about 120 mm risen, in four sections.

• Prints collapsed in one piece with no supports: the catch lips have 45-degree faces, the head is pointed and every hole has a pointed top. If the sections fuse, raise the clearance to 0.5 mm in the Customizer.

• Bambu Studio: 58 min, 27 g.

CUSTOMIZE (OpenSCAD)

Number of sections, width, section height and clearance.

Tags