116 models
Been working on this for months for my son during my spare time. Master sword with a telescoping blade. The blade pieces can be replaced as the top of the pommel screws off. The hilt is modeled after the Master Sword from Breath of the…
This is a print-in-place telescoping holder for colored art pencils. To raise it, grab the handle, twist clockwise, pull up, then twist counterclockwise to lock in place. In the raised position, you can easily see all the pencils. To…
This prototype is 16mm wide and just over 20cm long with 6 segments total. It has an average overlap of 20% which ends up giving about 100cm expanded. ---------------------------------------------------------------------------- If you are…
This sword (or I guess these swords) was/ were my second endeavor in creating some print in place models. Since the first one printed so well I decided to go bigger, and bigger, and bigger. There are a couple of different lengths , 4 to…
Simple knight's sword with a telescoping, replaceable blade. The blade pieces can be replaced as the top of the pommel screws off. Print Instructions : Hilt -Print at 0.20 mm layer height with a 0.4 mm nozzle -Print with 2 or 3 walls -15%…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Problem Statement: Using sketch offsets and drafted extrusions/cuts, you will create a telescoping fidget device. You and your partner will be “accountabillibuddies”. This means you will provide feedback on initial designs and plans, as…
I ran across the linked telescoping star and printed it with excitement. It looked so cool! Turned out it sucked. The thickness was so uneven that it actually fell apart. It wasn't even symmetrical. How do you design something like that?…
I've printed with no problems and it is fun. It telescopes in and out with a nice sound too. I didn't use any bed adhesion.
Lesson Plan and Activity As the final project for Introduction to Engineering Design, I was given the choice of what I wanted to do. I really enjoyed making print-in-place telescoping fidgets earlier in the year, so I wanted to revisit…
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Printed at 0.2mm layer height, 25% infill with supports on rafts. The Grips can hold phones with a case up to 16mm thick. At the back are tabs inside the opening for attaching rubber bands to pull the grips together against the phone. I…
A holder for 105 art pencils that telescopes for easier visual access. Grab the T handle and twist clockwise while pulling up to expand. Pull upward while twisting counterclockwise to collapse. When collapsed, turn all the way…
Overview I designed a telescoping rod that receives various attachments. The attachments included today are: A back scratcher A pivoting axis that takes a 32mm neodymium magnet. I am also planning a few more: A pivoting axis that accepts…
Telescoping cat wand. Attach a string and your cat's favorite toy! Or, just a string if that's what your cat is into. Print in place telescoping / expanding / collapsing cat wand.
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I was tired of buying and then…
These models print in place and can all fit together on one print bed. Models included are: Square Tower - 75x75mm base Circular Tower - 80mm diameter Castle Wall - 180x60 base I printed with single wall thickness and 10% infill with…
Print in default orientation for the overhangs to print properly. Depending on your printer the tolerances may be too tight and it may take some additional force to loosen the pieces up so it telescopes under it's own weight. Otherwise…
Fence Hook for Telescoping Pool Pole This was made for a 1in square fence to hold a telescoping pool pole but could be used for anything. 75% inner fill PETG Supports
**Newly updated Version 2!** previous concept with all new models optimized to be printable with minimal fuss! Three piece telescoping GPU support that can span gaps from 36 to 84 mm by default but could be scaled to accommodate a pretty…
Telescoping laptop stand. Collapsed size - 19x45x61. Extended size - 19x45x217. Printed with supports for the lip holder only in PLA. Can be scaled up in only height for larger laptops. It has 5 segments, so for every additional 5 mm,…
Activity overview: We chose the shield as our design cause we believed that this is really cool and would be really fun to make. I made this fidget with a partner, here's the link to his home page: @SriramKethin_3775782 Few things to…
LEGO train track of variable length up to two studs.
Latest files are available on MakerWorld. Get the full Plate Print Profiles with settings known to work: https://makerworld.com/en/models/436093 === Control the height of your desktop webcam with this adjustable webcam mount. — From about…
Collet-based system designed for telescoping 1" PVC pipe inside of 1.5" PVC pipe. Designed with center-mounting a flight stick in mind, but should be usable for any application involving length-adjustable PVC piping. Print Settings Rafts:…
This is a completely new design, made to improve the blade strength. Recently I did a remix of a nice model by Gwions : Gwions original : https://www.printables.com/model/131720-mini-lightsaber-toy/files My remix :…
A 3D-printed stool, no assembly required. Holds at least 170lbs with PLA (20% infill, 0.2mm layer height, 2 perimeters, no supports). Designed to elevate over 1ft, but I printed a smaller version to save filament. Made for a telescoping…
Summary Our fidget is a telescoping sun fidget that can fit in your pocket (around 8x8cm) and looks pretty anywhere! It doubles as both a fun thing to shake around, but also a fidget spinner because of its circular shape! It’s called a…
A must have tool for any hobbyist. I made this as compact as possible without sacrificing strength. You can find the 8 x 3 mm magnet you will need from any local Harbor Freight or on Amazon. It's really handy when you are working on…
Project Plan: This project aimed to create a telescoping fidget device by utilizing sketch offsets and drafted extrusions/cuts. The sketch must have begun with a constraint box (center rectangle created from the origin). Our outermost…
Please use petg or abs or asa to print this. It stays outside and pla could become problematic. Use a block of wood and a mallet to drive this into the flagpole. The ribs will shear off and leave a perfect fit.
This is a drawer tray to hold the Starrett No. S579H telescoping gauge set. It's intended to sit in a shallow drawer in your toolchest or machinist's chest, so it's a clean tray without lid or stacking features. For easy remix, you can…
$70 seemed a little steep for a floor-to-ceiling mount for a laser level. A few minutes of design and a couple of hours of printing brought it to a more manageable $20. I printed it with 4 walls for added rigidity. The pole I used was…
There might need to be some clean up on the parts that touch the build plate to remove the part that buldges so the wand pieces extend all the way.
reciever hitch to hold the 40 foot spiderbeam telescoping pole for wire antenna deployment. dont let it put the seam in the middle as thats where the most stress will be. 5 walls and a little heavier infill has worked so far. but it is…
Summary continued: It is easy to make and even easier to play with, along with an appealing look that is sure to wow anyone who sees it! This was created in collaboration with John Quigley - @ The3rdJohn_2915693 and Noah Poyau - @…
Simply print and snap layers apart after printing 2 versions: Normal and mini For best results, use 0.1mm XY Hole Compensation
Summary: This 8.5x7.5x0.75 cm desk fidget is in the shape of a pine tree, and can be shaken to move the interior pieces up and down, expanding to 1.5 cm tall. I worked on this project with @Jemus_2527457, his page can be found here .…
Store your SE telescoping magnetic pick-up tool (Model #: 8036TM-NEW) in a modern gridfinity bin.
I run a very busy printing operation & I mostly print off of 5 kg PETG spools. I've designed what I think is the best, versatile spool holder option for my XL printers. it looks simple at first glance, however, please read the below, as…
Screw driven linear rod, much like the kind used on telescoping lift desks.
I use this to incorporate the actual rod into my designs. You can screw off the magnet end and they have short m2 threading, and you can unscrew the back near the clip and they have m3 bolts and sockets Full fusion 360 model…
Hello, I made this tray because using the pouch they come with is annoying. The Starrett one someone else has made didn't work for the Mitutoyo set so i made my own lol.
A ghost that rises out of itself: lift it by its pointed head and four sections slide out to more than twice its height, then set it down and it sinks back. Lips on every section catch, so it never comes apart. DETAILS • 55 mm tall…
This is simple attachment that fits on standard painting pole to push and pull stuff that is out of hands reach. i.e. opening/closing high windows, picking fruit out of reach, grabbing stuff from deep in a cupboard. Wifey had used it…
https://www.printables.com/model/1039170-telescoping-mast-base-plate I made this before finding this model. I highly recommend this model versus the one I made: https://www.printables.com/model/225224-spiderbeam-12m-mast-ham-radio. The…
Telescoping fibre-glass poles were originally designed as fishing rods, but they are also used by radio amateurs to erect antennas in the field. A popular brand of these poles was sold by Lambdahalbe in Germany. Owners of such a pole…
I liked Zormis's telescoping back scratcher [on thingiverse] but even at 100% infill after a couple uses the small [threaded] sleeve would break from being too thin. This lead me to preferring the bigger more sturdy telescopic back…
Made some space for a pocket and stacked the larger gauges underneath the ones I use more commonly.
Summary Continued: collaboration with @JasonWang_3775776 and @VanyaNar_3771481 Lesson Plan and Activity: Problem Statement: You will create a Print-In-Place telescoping fidget by creating multiple offsets, drafted extrusions, and cuts in…
Most telescoping ladders come with a plastic cap on the top to prevent water and debris from falling into the rails. Those unfortunately come off easily and then get lost easily. You can find replacements fairly inexpensively, or you can…
The T.S.R. Stock: T elescoping S quare R ail The TSR is a sliding collapsible stock that utilizes steel or aluminum rectangular bar stock. Thanks to @ToolOrDie for the design of the brace. It is designed to mount on a rear picatinny or CZ…
UPDATE: version v2 is now having the want top hidden inside of the wand, so nothing is sticking out of the want after collapsing it. It is pre-supported so after printing you need to take the support out. Print in place model for…
This uses the same 6mm or 1/4" rods as the original design as well as the same locking mechanism and hardware, just shrunken down a smigde to fit under the reinforcement plates on a K receiver. The brace is not original to Daikon's design…
Telescoping selfie stick! For getting those perfect shots on holiday! Super fun and easy print! Place supports under the phone holder portion but not in the telescoping part.
This is remixed version of the https://www.printables.com/model/943562-telescoping-pencil-holder-for-110-or-75-pencils model. Credits to @raybetter_104737 for the design and sharing. Current version has bigger pencil holes (96 in total),…
Part of my project to create gridfinity toolbox using Dewalt TStak Drawers. Holds the Dewalt DWHT68001 and 14 bits. Includes magnet holes.
Lesson Activity: Project Summary - Create a telescoping fidget device using sketch offsets and drafted extrusions/cuts. You’ll work with a partner as "accountabillbuddies," giving each other feedback on designs and helping solve issues as…
Print Advisory for Blades 1 & 2: To prevent artifacts/wobbling at the top of the blades caused by lateral movement, I have included a custom support structure. Slicing Instructions (see images): Place the support and scale it along the…
Part list : Set screw M4x5 5pcs Countersunk hex M3x10 2pcs Countersunk hex M4x10 2pcs Countersunk hex M4x35 2pcs Socket head M4x16 3pcs Geared motor with 4mm shaft (i use JGA25-370) T8 acme thread rods X2pcs - 180mm length T8 acme nut…
Sizes: Large - from 47 mm to 77 mm Medium - from 32 mm to 48 mm Sall - from 25 mm to 34 mm Printing First, print the 4 necessary parts. For the nut and body, I recommend using the same size to achieve the full range of motion. However,…
Problem Statement: Work with a partner to create a telescoping fidget device made through the utilization of sketch offsets and drafted extrusion/cuts. As accountabilibuddies, you and your partner will be able to work together to provide…
This is o'cello with 1/2" center rod ( 13mm-ish hole ). First thanks cokane for the excellent model, I own a electric one but it is rather bulky, and I try to make a compact one in this build. I used these items: tube (…
As long as you print in the orientation shown in the picture, you shouldn't need supports.
A set of various sized brackets to attach telescoping poles to my fence. Not sure how much stress they can take, but I assume a typical telescoping pole would bend/break before these brackets. See the file names for the approximate…
Building a small sandcastle requires starting with a pile of wet sand, which is what I originally designed this bucket for carrying and depositing. Although it is intended for sand, the joints are tight so that this bucket can hold water,…
These are for a standard 20' by 3" diameter telescoping pole. The top is for mounting the gold ball or Eagle. Then a flag clip, plus a ring to keep it at the top which you need to drill for the original screws. Then another clip that…
Summary: A telescoping fidget that looks like a mug and has no assembly required! Summary (expanded): This fun fidget is designed to look like a mug, but is much smaller, measuring at just 8cm by 8cm, perfect for anybody’s desk. It was…
This is one part (Solar Panel Bracket to Flagpole Mount) of an assembly. The completed assembly is a meshtastic node atop a 20Ft telescoping flag pole. Related Hardware: RAK Wireless WisBlock Meshtastic Starter Kit:…
Summary Continued: You can bring it anywhere, and it's durable. I collaborated with @JasonWang_3775776 and @MariMar_3771548. Lesson Plan and Activity Problem Statement: You will create a Print-In-Place telescoping fidget by creating…
I was tired of the telescoping bore gauges kicking around in the toolbox drawer so I whipped up this neat storage tray. It should fit most gauge sets as I wouldn't think they'd vary all that much in size. Each gauge has its own pocket and…
Print in place coffee cone stand.
When testing out the original model, i discovered that the two stands that i was using liked to move around lot, which bugged me, so I decided to spend some time connecting the the two stands together at varying distances to work with…
Summary This 18x16.5x0.75cm telescoping maple leaf fidget is a fun, sturdy, and simple toy that reduces anxiety and improves concentration! As a print-in-place model with no assembly required, it is ready for use immediately after…
Simply print and snap layers apart after printing For best results, use 0.1mm XY Hole Compensation If you like this, support me!
Summary This 8 cm x 7.6 cm x 1.5 cm mug is a great stress reliever and can make anything feel less boring. You can print it in different colors to truly make it your own. I worked on this project with Charlie, and you can find his profile…
I created this model in Fusion. I wanted to make it to fit the basic trucker style antenna mount. I have it wrapping around the base structure then I made the hole to where the bottom fits in the hex screw base mount as well as the wider…
SUMMARY It’s a little over 18 cm by 18 cm with a depth of 1.5 cm. It looks like a Mario mushroom and has a nested mushroom top that can fall inward without falling apart. You can also play with it down on a surface an wiggle it around.…
My telescoping height adjuster would not stay on a dollar general fan so simply hung from ceiling with this bracket and now its at the right height just bolted to ceiling, used 20 infill and regular drywall screws for mount. The first one…
A print-in-place telescoping mummy for Halloween. Lift it by the head and it rises out of its bandages to more than twice its height; set it down and it sinks back into a squat little mummy. Catch lips on every section stop it coming…
Hook to hold open a screen and slides in for storage. Printed on an Ender 3V2 using Sunlu PLA. The print in the photos failed almost all the way through so I printed a cap for it to avoid wasting plastic
SUMMARY This beautiful fidget is sure to amaze you and help you focus for hours on end. It can grow and shrink, and when not in use, can even be used as decoration! I worked on this project step-by-step with Joshua, and his design can be…
This is a 1x5x6 gridfinity holder for a square telescoping inspection mirror with the dimensions of 42mm x 64mm with a 295-730mm handle, such as this one found on AliExpress . I'm sure it will work with others with similar dimensions.
an ice scraper with a three-part retractable handle
The Rings can be separated by careful bending but will not fall out unless printed incorrect. I originally made this toy when I made the Space Ship with expanding fire. I decided to make my own counter part, The UFO!
A pegboard holder for a Pittsburgh/Harbor Freight Telescoping Mirror . Supports needed for the pegs.
A Schedule 40 Pipe coupling with long inlet for telescoping to fit. Printed in Prusament PC Blend on Garolite. Designed for gutter water control and routing to rain barrels via 3" schedule 40 pipe.
Designed myself in fusion 360. Can be scaled to size. The small version is pre dimensioned to the general brand magnet. The standard size is designed for a generic brand magnet. Both models are thin enough at the ends to still magnetize…
Design Statement: The assignment was to pick a 2D shape and create a telescoping fidget based on the shape. We decided to make a tennis ball fidget because both collaborators play tennis. Creation in Solidworks: We began with a reference…
Made this to fix my Toyota Corollas telescoping steering wheel since the OEM part broke. Use 3 M3x10 bolts. Print in a vertical orientation.
Simply print and snap layers apart after printing For best results, use 0.1mm XY Hole Compensation If you like this, support me!
This is the Telescoping Phone Holder made by Yuxiang Tian , Cai Scheidler , and Siwen Long for the 2025 CAD Challenge Hackathon. Read more about it here https://devpost.com/software/a-telescoping-phone-holder Contains 3mf files for…
Remodelled replacement for an spring-loaded Tripp suitcase handle piece after superglue failed me. The symptoms are a telescoping handle that only works on one side, and a handle button that doesn't spring back reliably. To install, undo…
Uses 2 original, unchanged parts from https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed . I added what's needed in the files tab, but might remove them on author's request. I had an old fluorescent work lamp…
I picked up a new fibreglass pole from AliE which arrived with the end caps shattered in shipping... I printed up some new end caps, and made the outer diameter fit the inner diameter of my POTA ground spike tightly (as seen in the…
A quickly reverse engineered model of the black plastic button for the spring-loaded detents on a set of “Garden Pro” telescoping secateurs. One of the two black buttons broke off and needed to be replaced. It should be possible to print…
Lost the rubber cap for my buddipole telescoping whip , which also keeps the last piece from going in too far, inhibiting deploying the antenna. I printed the cap in PETG and was able to get a snug enough friction fit for it not to slide…
The Harbor Freight telescoping flagpole is popular for mounting Starlink Minis to campers, rvs, and overland vehicles. I needed to mount mine to the t-track rack on an Opus camper, so it's an esoteric item. This bracket attaches to the…
This directly replaces HomeLite part # 529293001 , which is used on various older Ryobi mowers and snowblowers to lock the handles in place when extended.…
Simply print and snap layers apart after printing For best results, use 0.1mm XY Hole Compensation If you like this, support me!
