Telescoping Cat Saber - Retractable Cat Wand Toy!
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.33 – €2.85 net (excluding VAT)
For file: CatWand1of2_0.2mm_PLA_MINIIS_2h42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.59 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.7 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It's a cat wand that retracts!
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 305
- Makes
- 1
- Views
- 1,986
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support.
If you find this model useful, feel free to buy me a coffee.
I was tired of buying and then losing or breaking cat wand toys. So I decided to make my own.
This wand telescopes from 6 ¾" to 24 ½". (17cm to 62cm.) To complete it, you'll need a small string and a cat toy. I also recommend adding a fishing swivel to each end of the string. That helps feather toys spin without tangling.
The bottom of the handle has a threaded cap, so you can remove the inner pieces to sand, etc. I had to sand the seam lines on mine because they stuck out a bit. If you sand too much, the pieces may slip out of each other. You can fix this with a small band of scotch tape or masking tape at the base of the cylinder that's slipping out. You can also play around with XY Compensation to get the fit just right. (It's called Horizontal Expansion in non-Prusa slicers.)
The cap should screw fairly easily on the threads after a few turns back and forth. If it doesn't, see above regarding XY Compensation.
I added a subtle cat pattern on the handle and a cat face on the bottom of the cap, based on royalty-free clip art.
Let me know what other features you want me to add. A twist lock that prevents the wand from coming out? A fishing pole reel? I'd love to hear your ideas.
Instructions:
- Print CatWand1of2 in one color without supports. (This is the cap and the handle.) I highly recommend an outer brim. Don't use an inner brim or else the cat on the bottom on the cap will have its eyes and nose filled in with brim. Or you could always just separate the cap and print it by itself with no brim. PrusaSlicer may give you a warning about Long Bridging Extrusions, but you can ignore it.
- Print CatWand2of2 in a different color without supports. (These are the three inner cylinders.) For this, you probably want an outer AND an inner brim, so the two stacked cylinders are well-affixed to the build plate. You'll notice that one piece is flat on the plate. That's on purpose. It's the smallest piece, and this orientation prevents it from snapping when cats play too rough.