SKÅDIS light holder for Osram LED Switch Batten
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clip-on holder that mounts an Osram (LEDVANCE) LED Switch Batten on an IKEA SKÅDIS pegboard.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A simple clip-on holder that mounts an Osram (LEDVANCE) LED Switch Batten on an IKEA SKÅDIS pegboard. Hook it into the board and snap the light in. You don't need screws, glue or tools, and you can move the light whenever your layout changes.
Use two holders per light, or three for longer battens. The on/off switch and cable stay accessible.
I recommend PETG or any other material that has similar properties in regards to warmth resistance and flexibility. With PLA the holder might break.
Print settings
Material: PETG
Layer height: 0.2 mm
Infill: 20–30 %
Perimeter: 3
Supports: Snug, on Build-plate only (for the pegs)
Orientation: print as oriented in the file
Update 2026-10-19: I changed the hook part of the clip for a both way rounded version so it will be easier to dislodge the batten without breaking the print.