Torx Key Handles & Bench Holder – T9 to T40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn a $5 folding Torx/star key set into comfortable T-handle drivers with a labeled under-bench holder. T9–T40.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Those $5-10 flip-out star (Torx) key sets are cheap, but they are a pain to use. Pop the keys out and give each one a real handle!
This set includes 8 handles (T9, T10, T15, T20, T25, T27, T30 and T40) and a holder that screws to the underside of a workbench or shelf. Every handle is a different size and labeled, so each one only fits its own spot, and the kids put them back where they belong.
We have used these around the house and in my workshop for months. They work awesome.
Also available in matching SAE and Metric sets. Print Torx in gray or silver, SAE in red and Metric in blue to match standard tool color coding.
Files: the 3MF has everything on one plate (Bambu P1P, 0.4 nozzle). The individual STLs are included too.
Parts
Folding star key set. These are the ones I use: https://www.harborfreight.com/pack-of-3-folding-star-bit-and-sae-metric-hex-keys-94905.html (the Torx keys in the Hyper Tough Walmart set may or may not fit)
2-4 wood screws to mount the holder
Optional: super glue
Assembly
Take apart the folding set to get the individual keys.
Press each key into its matching handle. They are a tight fit by design: use a hammer, a good pair of pliers, and a flat head screwdriver to push them all the way in (see photos).
If a key is loose (2 of my 25 handles were), add a drop of super glue.
Screw the holder to the underside of your bench and drop the handles in.
Tip: color the raised labels on the holder with a Sharpie, or use a filament change for the top layers.
Attributions
None, my original design.
Print Settings
Layer height: 0.12 mm
Walls: 2
Infill: 15%
Supports: No
Material: PLA