1 / 13
ColorMix Owl Sculpture — zdjęcie 1
1 / 13

ColorMix Owl Sculpture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An owl sculpture for testing different combinations of colors. Colors can be easily assigned or mixed by region.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Public Domain

This owl sculpture can be used to test a large combination of colors using #colormix. The model can be printed as is without supports, however using brim is recommended for stability during printing (especially on satin printsheets).

The model was created from an old 3d scan of a set of photos from a small artisanal ceramic/clay owl sculpture. The 3D scan was performed with photogrammetry on Meshroom and mesh cleanup and refinement for color assignment was done on Blender. I had to use Color Mix Lab for assigning the vertex colors on the .obj model into prusaslicer readable virtual extruders (mostly for importing separated mesh regions for coloring).

My test prints were done on Core One INDX 8T with presets 0.15mm and 0.20mm. In my case, printing #colormix at 0.15mm, or smaller, made a large difference for more opaque and saturated filaments such as the black and the orange.

Files:

  • Project saved in .3mf for PrusaSlicer 2.96

  • Project saved in .3mf for PrusaSlicer 3.00a12

  • .obj with colors assigned as vertex colors importable into 2.96

Filament list used on my test prints:

  1. Prusament PLA Colormix Cyan

  2. Prusament PLA Colormix Magenta

  3. Prusament PLA Colormix Yellow

  4. Prusament PLA Colormix White

  5. Prusament PLA Colormix Black

  6. Prusament PLA Colormix Gold

  7. Prusament PLA Colormix Silver

  8. Prusament PLA Prusa Orange

Tagi