ColorMix Owl Sculpture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An owl sculpture for testing different combinations of colors. Colors can be easily assigned or mixed by region.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
This owl sculpture can be used to test a large combination of colors using #colormix. The model can be printed as is without supports, however using brim is recommended for stability during printing (especially on satin printsheets).
The model was created from an old 3d scan of a set of photos from a small artisanal ceramic/clay owl sculpture. The 3D scan was performed with photogrammetry on Meshroom and mesh cleanup and refinement for color assignment was done on Blender. I had to use Color Mix Lab for assigning the vertex colors on the .obj model into prusaslicer readable virtual extruders (mostly for importing separated mesh regions for coloring).
My test prints were done on Core One INDX 8T with presets 0.15mm and 0.20mm. In my case, printing #colormix at 0.15mm, or smaller, made a large difference for more opaque and saturated filaments such as the black and the orange.
Files:
Project saved in .3mf for PrusaSlicer 2.96
Project saved in .3mf for PrusaSlicer 3.00a12
.obj with colors assigned as vertex colors importable into 2.96
Filament list used on my test prints:
Prusament PLA Colormix Cyan
Prusament PLA Colormix Magenta
Prusament PLA Colormix Yellow
Prusament PLA Colormix White
Prusament PLA Colormix Black
Prusament PLA Colormix Gold
Prusament PLA Colormix Silver
Prusament PLA Prusa Orange