Rising Christmas Tree Fidget - Print-in-Place Telescoping Tree, No Supports (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lift it by the top and it rises into a tall tree with baubles; set it down and it sinks back into a little cone.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A print-in-place telescoping Christmas tree: lift it by the top and it rises out of itself into a tall tree with a zigzag hem and baubles; set it down and it sinks back into a little cone. Lips on every section catch, so it never comes apart. A festive sibling of the Rising Ghost and Rising Snowman, and a great stocking filler.
DETAILS
• 66 mm wide, 58 mm tall collapsed and about 130 mm risen, in five sections.
• Prints collapsed in one piece with no supports: the catch lips have 45-degree faces, the top is a cone and the bauble holes have pointed tops. If the sections fuse, raise the clearance to 0.5 mm in the Customizer.
• Bambu Studio: 1 h 13, 32 g.
CUSTOMIZE (OpenSCAD)
Number of sections, width, section height and clearance.